shanghai Sooan International trade Co,Ltd
Shanghai Sooan International Trade Co,Ltd
Add to Cart
Product Description
T Series Belt Weighing Scales Feeder for Non Metallic Mine by Weight Belt Feeder
Product Feathers
| Main Feather | ||||||||
| • system accuracy: ±1%, | ||||||||
| • weighing range: 30t/h,25t/h,15t/h,10t/h,5t/h,1.5t/h | ||||||||
| Parameters | ||||||||
| • weighing structure: our light flat roller belt scale frame patent No. 201120235598.4 | ||||||||
| • belt width: 500, 650, 800, 1000, 1200, 1400, 1600 mm, etc. | ||||||||
| • belt skirt hem height: 60 mm | ||||||||
| • belt feeder length: 2.5m~6m. | ||||||||
| • frequency control motor: 0.25~2.2kW, AC380V/3 phases | ||||||||
| • reducer speed ratio: 35~945 | ||||||||
| Motor&Reducer Setting: | ||||||||
| • reducer: DZXD65 | ||||||||
| • reduction ratio:317 | ||||||||
| • variable frequency motor: 1.1kW | ||||||||
| • Inverter motor: YVF2-90S-4, 1400rpm, 1.1kw,ac380V | ||||||||
| Note:The speed orifice of Reducer turn upwards,the junction box of motor front side of motor | ||||||||
| Reducer Parameter: | ||||||||
| Name | Item | Power kw | Gear Ration | Shaft extension | L&R Install | Speed measure | Remark | |
| Hole | Gear | |||||||
| Reducer | DZXD65 | 1.1 | 317 | 35 | Left | M16×1 | 40 | Frequency Motor |
SFT Sensor on Intelligent technique
| Optional |
| • Virtually deflection free weight measurement by the digital SFT load cell with very high resolution (1:1’000’000). |
| • Factory calibrated, no calibration weight needed. |
| • 100 % digital connection |
Weigh Belt Feeder with Options
Settling Chamber & Schema
| • For the de-airing and stabilisation of fluidised bulk materials before being conveyed over the weighbridge. |
| • Equipped with a set of chain curtains and retention plates; the position of these elements is optimised during start-up as a function of the material flow behaviour. |
| • To be connected to the plant dedusting installation for the elimination of the air from the fluidised bulk material. |
| • Can be fitted with a «float» level measuring system to control the prefeeder via a dedicated 3-point control loop so as to maintain a preset settling chamber filling level. With this control concept the material is extracted from the settling chamber with a material bed height given by the shear gate setting |
Flowrate
| Material density (kg/dm³) | 0.4 | 0.6 | 0.8 | 1 | 1.2 | Size | ||
| Puverised coal | Pulverised Coal fly ash | Raw meal | Cement | Gypse | ||||
| Typical materials | Typical flow | Standard | Maximum | |||||
| POWDRIT 650 | Min. min. (t/h) | 0.25 | 0.3 | 0.3 | 0.3 | 0.3 | 650 x 2700 | 650 x 4700 |
| Max. max. (t/h) | 5 | 7 | 10 | 12 | 14 | |||
| POWDRIT 800 | Min. min. (t/h) | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 800 x 2700 | 800 x 4700 |
| Max. max. (t/h) | 20 | 25 | 50 | 60 | 70 | |||
| POWDRIT 1000 | Min. min. (t/h) | 1 | 2 | 2 | 2 | 2 | 1000 x 3100 | 100 x 4700 |
| Max. max. (t/h) | 35 | 50 | 90 | 110 | 135 | |||
| POWDRIT 1200 | Min. min. (t/h) | 2 | 3 | 3 | 3 | 3 | 1200 x 3100 | 1200 x 4700 |
| Max. m
Inquiry Cart
0
| ||||||||