shanghai Sooan International trade Co,Ltd
Shanghai Sooan International Trade Co,Ltd
Add to Cart
Product Description
DMC dust collector makes the compressed air as driving force for cleaning air, uses pulse injection organization releases the compressed air instantly and induces the severalfold secondary air into the filter bag at high speed to make the bags expand rapidly so as to impact,shake and reverse flow to clean the dust.
The products are a series of products with the filter bag for a set number 12, mainly in 24 bags, 36 bags, 48 bags, 60 bags, 72 bags, 84 bags, 96 bags, 112 bags, 120 bags.
Main Features for Dust Collector
| 1) The dust removing efficiency is over 99.9% and emission concentration is less than 30mg/Nm3. |
| 2) High density dust air below 1000mg/Nm3 is available. |
| 3) It has stable and reliable performance, high degree of automation and low investment. |
| 4) Wear resistance and Corrosion resistance |
| 5) High temperature resistance and Long operating life |
| 6) Safe and reliable operating performance stable and Small footprint and low cost |
| 7) Simple operation and Easy administrate and without operation cost |
Product Details
Baghouse Structure
Technical Parameters for Dust Collector
| Model | JBQM | JBQM | JBQM | JBQM | JBQM | JBQM | JBQM | JBQM | JBQM | |
| 32-3 | 32-4 | 32-5 | 32-6 | 64-4 | 64-5 | 64-6 | 64-7 | 64-8 | ||
| Technical parameter | ||||||||||
| Air volume(m³/h) | 6690 | 8930 | 11160 | 13390 | 17800 | 22300 | 26700 | 31200 | 35700 | |
| Total filter area(m²) | 93 | 124 | 155 | 186 | 248 | 310 | 372 | 434 | 496 | |
| Chamber(pcs) | 3 | 4 | 5 | 6 | 4 | 5 | 6 | 7 | 8 | |
| Quantity of filter bag(pcs) | 32 | 64 | ||||||||
| Total quantity filter bag(pcs) | 96 | 128 | 160 | 192 | 256 | 320 | 384 | 448 | 512 | |
| Pulse Valve | Quantity(pcs) | 3 | 4 | 5 | 6 | 4 | 5 | 6 | 7 | 8 |
| Specitication(inch) | 1/½″ | 2/½″ | ||||||||
| Specification of filter bag(D×Lmm) | ∅130×2450 | |||||||||
| Filter material | Based on flue gas properties | |||||||||
| Filtration speed(m/min) | 0.8~2.0(Adjustable) | |||||||||
| Negative pressure(pa) | ≤6000 | |||||||||
| Resistance(pa) | 1470~1770 | |||||||||
| Inlet dust concentration(g/Nm³) | <200 | <1000 | ||||||||
| Blowing pressure(Mpa) | 0.5~0.7 | |||||||||
| Compressed air consumption(Nm³/min) | 0.27 | 0.37 | 0.46 | 0.55 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | |
| Air locking unit | Adjustable | |||||||||
| Screw converyor | NO | Adjustable | ||||||||
| Area of heat preservation(m²) | 26.5 | 34 | 41 | 48.5 | 70 | 94 | 118 | 142 | 176 | |
| Model | JBQM | JBQM | JBQM | JBQM | JBQM | JBQM | JBQM | JBQM | JBQM | JBQM | JBQM | JBQM | |
| 96-4 | 96-5 | 96-6 | 96-7 | 96-8 | 96-9 | 96-10B | 96-12B | 96-14B | 96-16B | 96-18B | 96-20B | ||
| Technical parameter | |||||||||||||
| Air volume(m³/h) | 26800 | 33400 | 40100 | 46800 | 53510 | 60100 | 66900 | 80400 | 93750 | 107150 | 120500 | 133900 | |
| Total filter area(m²) | 372 | 465 | 557 | 650 | 744 | 836 | 930 | 1023 | 1209 | 1395 | 1581 | 1767 | |
| Chamber(pcs) | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 12 | 14 | 16 | 18 | 20 | |
| Quantity of filter bag(pcs) | 96 | ||||||||||||
| Total quantity filter bag(pcs) | 384 | 480 | 576 | 672 | 768 | 864 | 960 | 1152 | 1344 | 1536 | 1728 | 1920 | |
| Pulse Valve | Quantity(pcs) | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 12 | 14 | 16 | 18 | 20 |
| Specitication(inch) | 2/½″ | ||||||||||||
| Specification of filter bag(D×Lmm) | ∅130×2450 | ||||||||||||
| Filter material | Based on flue gas properties | ||||||||||||
| Filtration speed(m/min) | 0.8~2.0(Adjustable) | ||||||||||||
| Negative pressure(pa) | ≤6000 | ||||||||||||
| Resistance(pa) | 1470~1770 | ||||||||||||
| Inlet dust concentration(g/Nm³) | <1300 | ||||||||||||
| Blowing pressure(Mpa) | 0.5~0.7 | ||||||||||||
| Compressed air consumption(Nm³/min) | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 2.7 | 3 | 3.4 | 4.2 | 4.8 | 5.4 | 6 | |
| Air locking unit | Adjustable | ||||||||||||
| Screw converyor | Adjustable | ||||||||||||
| Area of heat preservation(m²) | 110 | 120 | 130 | 140 | 150 | 160 | 175 | 210 | 215 | 280 | 315 | 350 | |
Case Presentation
Order Steps
Our Services
| We provide 12months quality warranty to make sure your machine well runs consistently. |
| 1) Pre-sale services: |
| a. Professional engineer design layout drawing for you |
| b. Recommend most suitable equipment according to your factory situation. |
| 2) During-sale services: |
| a. Pre-check and accept products before delivery |
| b. Send technicians to the jobsite for guiding the installation and adjustment |
| c. Training operators and finishing the check to satisfy factory situation. |
| 3) After-sale services: |
| a.Common problem can be solved through web in 24 hours,complex problem can be reacted immediately in 24 hours and solved as soon as possible |
|
Product Tags:
Inquiry Cart
0
|